Buy

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch

KSh15,000

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch

DGS-1100-08P Specifications

  • IEEE 802.1p QoS (4 Queues, Strict Mode)
  • Supports Cable Diagnostics
  • Full/half-duplex for Ethernet/Fast
  • Ethernet Speeds
  • 8 10/100/1000 Mbps Gigabit Ports
  • IEEE 802.3x Flow Control
  • Auto MDI/MDIX Crossover for all ports
  • Store-and-forward Switching Scheme
  • Plug-and-play Installation
  • Built-in D-link Green Technology
  • RoHS Compliant

Description

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch

Shop for 8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch in Nairobi, Kenya at Starmount Solutions Dlink dealers.

DGS-1100-08P Smart Switch Overview

D-Link’s DGS-1100 Series Gigabit Smart Managed Switches provide an affordable solution for businesses of all sizes that require simple network management. The DGS-1100-08P consist of 5, 8, 10, 16, 24 and 26 Gigabit port models with a wide variety of functions and features. The 5 and 8 port models come in compact metal desktop enclosures, while the 10, 16, 24 and 26 port models come in metal enclosures. They support either desktop or rack mounting. Four models support 802.3af/at Power over Ethernet (PoE), with a range of PoE power budgets from 64W to 370W. There are also two PoE-powered models. One has the ability to pass-through power to one or two PoE devices downstream.

D-Link Green/Power Saving Performance

Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), these switches consume less energy by cutting down on power consumption when port utilization is low. By deploying EEE devices, users can cut operating costs and reduce necessary cooling equipment, helping small and medium-sized businesses stay within their budgets. The DGS-1100 switches also feature D-Link Green Technology that helps save energy automatically. The switches monitor the link status of every port and reduce power consumption on the interface when there is no link or no network traffic detected.

Easy to deploy

The DGS-1100 switches support an intuitive client-based utility (D-Link Network Assistant Utility) and a web-based management interface. The client-based utility discovers all D-Link Smart Switches within the same Layer 2 network segment, making initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based management interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switch to be controlled from any network connected PC.

Surveillance VLAN and Bandwidth Control

The DGS-1100 switches support Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This also ensures security, and guarantees the quality of the video traffic, sparing businesses the added cost of dedicated surveillance networking hardware. Bandwidth Control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority.

Advanced Features

The DGS-1100 Series switches are equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the loading of L3 multicast routers and save bandwidth in network throughput.

Easy Troubleshooting

The DGS-1100 Series switches feature Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

 

DGS-1100-08P PoE Switch Specifications

  • IEEE 802.1p QoS (4 Queues, Strict Mode)
  • Supports Cable Diagnostics
  • Full/half-duplex for Ethernet/Fast
  • Ethernet Speeds
  • 8 10/100/1000 Mbps Gigabit Ports
  • IEEE 802.3x Flow Control
  • Auto MDI/MDIX Crossover for all ports
  • Store-and-forward Switching Scheme
  • Plug-and-play Installation
  • Built-in D-link Green Technology
  • RoHS Compliant
62 / 100

LET’S KEEP IN TOUCH!

We’d love to keep you updated with our latest news and offers 😎

We don’t spam! Read our privacy policy for more info.

Reviews

There are no reviews yet

Be the first to review “8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch”