Hikvision DS-3E1310P-EI/M 8 Port Fast Ethernet Smart POE Switch

Hikvision DS-3E1310P-EI/M 8 Port Fast Ethernet Smart POE Switch

The Hikvision DS-3E1310P-EI/M is a reliable network switch designed to simplify management and improve performance. It allows device management through the web, while the built-in DHCP Client automatically assigns IP addresses for smooth setup. A fixed Super IP (10.180.190.200) ensures quick direct access when needed.

• 8 × 10/100 Mbps PoE ports, 2 × Gigabit RJ45 port
• Total PoE Power Budget 60 W
• Support 802.1Q VLAN
• Up to 300 m Long Range PoE Transmission
• Support PoE watchdog to detect and restart the cameras that do not respond
• 6 kV Surge Protection
• Support STP/RSTP Loop prevention
• Support cable detection to locate failure

Hikvision DS-3E1310P-EI/M Specification

• General
• ShellMetal material
• Net Weight: 0.54 kg (1.19 lb)
• Gross Weight: 1.08 kg (2.38 lb)
• Dimensions (W × H × D) 217.6 mm × 27.6 mm × 108.5 mm (8.57” × 1.09” × 4.27”)
• Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
• Operating humidity: 5% to 95% (no condensation)
• Relative Humidity: 5% to 95% (no condensation)
• Power SupplyDC54 DC54 V, 1.2 A
• Installation ModeDesk-Mounted,Wall-Mounted
• Max. Power Consumption 65 W
• Power Consumption in Idle5 W
• Surge Protection6 kV

Network Parameters

• Ports8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
• MAC Address Table4 K
• Switching Capacity

  Whole-Device Performance: 9.6 Gbps

  Port Performance: 5.6 Gbps

• Packet Forwarding Rate

  Whole-Device Performance: 7.14 Mpps

  Port Performance: 4.17 Mpps

• Internal Cache2 Mbits

• PoE Power Supply
• PoE Power Budget60 W
• Long Range
• PoE StandardIEEE 802.3af,IEEE 802.3at
• Max. Port Power30 W
• PoE Power PinEnd-span: 1/2(-), 3/6(+)
• PoE Port: Ports 1 to 8

Software Function

Ports 1 to 8: up to 300 m.

Long range performance may vary depend on camera model or cable condition.

• Port Isolation

  Ports 1 to 8: port isolation mode to improve network security

  Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

• PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
• Loop Prevention

  Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

  Support 802.1D STP.

  Support 802.1w RSTP.

VLAN

VLAN is used for network-scale planning and network health improvement.

Support 802.1Q.

Configurable VLAN ID from 1-4094.

Support trunk, access port mode.

Support Max. 4094 VLAN.

• HPP

  Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

  1. Display the port rate.

  2. Display the port bandwidth utilisation rate.

  3. Display the PoE power usage.

  4. Display topology information.

  5. Display the alarm status.

  6. Restart ports and devices.

  7. Enable port long-rage mode.

  8. Remotely upgrade the device.

System Maintenance

• • Device management is available via web.

  • The DHCP Client is enabled by default for dynamic assignment of management IP addresses.

  • A Super IP (10.180.190.200) is provided for direct access.

  • Management is also possible via Hik-Central Pro.

  • Remote control can be done through Hik-Partner Pro.

  • Cable detection is included.

  • It supports 802.1ab LLDP for peer device discovery.

  • Port mirroring is available for fault locating.