Netis P106GC 4GE POE+1GE +1GE SFP Uplink POE Switch
Netis P106GC 4GE POE+1GE +1GE SFP Uplink POE Switch Netis 4GE POE+1GE Uplink +1SFP POE Switch P106GC provides a great selection forexpanding your home, store or office network. It fully complies with IEEE802.3/802.3u/802.3ab/802.3z Ethernet…
Product information
Netis P106GC 4GE POE+1GE +1GE SFP Uplink POE Switch
Netis 4GE POE+1GE Uplink +1SFP POE Switch P106GC provides a great selection forexpanding your home, store or office network. It fully complies with IEEE802.3/802.3u/802.3ab/802.3z Ethernet standards. It provides 4 Gigabit POE RJ45 Ports and 1 Gigabit uplink RJ45 port and 1 Gigabit SFP uplink port. All POERJ45 ports support Power over Ethernet function and it can automatically detect and supply power with the IEEE 802.3at/af compliant Powered Devices (PDs).Supports two modes: Normal Mode/Port VLAN + Watch Dog Mode(Port isolation+24 hours intelligent detection and troubleshooting capabilities. Automatically restarts problematic ports). VLAN will provide more smooth network and better using experience.
Features
- 4* 10/100/1000Mbps RJ45 ports and 1*SFP port
- Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
- Power supply: built-in 60W
- Supports PoE IEEE 802. 3at/af compliant Powered Device (PD)
- IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- All ports support Auto MDI/MDI-X function
- 12Gbps switching fabric capacity/backplane bandwidth
- Supports 2K MAC address table, MAC address auto-learning & auto-aging
- Support MAC address auto-learning & auto-aging
- Support Normal Mode/Port VLAN + Watch Dog Mode
- Plug and Play
Specification
| Interface | 4 10/100/1000M POE Ports (Data /Power)
1 10/100/1000M uplink RJ45 Ports (Data) 1 SFP Slot(Data) |
| LED | PWR: Lighting - The device is powered on normally
AI: Lighting - The intelligent mode is enabled Port: Lighting - Port link is normal Blinking - Data in transit |
| Mode | Normal Mode
Port VLAN + Watch Dog Mode |
| VLAN | Yes |
| Switching Capacity | 12G |
| MAC Address Table Size | 2K |
| Jumbo Frame | 2048 byte |
| Power Input POE Standards | Single port maximum power 30W, whole switch maximum power 60W
Supporting over-current, over-voltage and short-circuit protection Supporting Soft Start of High Power PD Support sequential boot-up Power Supply:AC 100~240V, 50-60HZ |
| Data Transfer Rate | Ethernet : 10Mbps(Half-duplex and Full-duplex)
Fast Ethernet :100Mbps(Half-duplex and Full-duplex) Gigabit Ethernet :1000Mbps(Full-duplex) |
| Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD) provide a standard SFP slot Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging Supports port isolation to effectively suppress network storms |
| Standards | IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
| Cabling type | 1000Base-TX: Cat 5e or better UTP/STP(≤100m)
100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤100m) |
| Environment | Operation Temperature:0℃~40℃
Storage Temperature:-40℃~ 70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing |
| Dimensions | 125 * 115 * 34mm(L * W * H) |
https://www.netis-systems.com/support/downinfo.html?type=business&id=15
A single product.
Or your next big project.
Tell us what you need. Let’s find the right equipment and approach.

