Ubiquiti Networks PBE-5AC-500-ISO
5GHz PowerBeam ac ISO 27dBi 500mm
Get Ubiquiti Networks PBE-5AC-500-ISO 5GHz PowerBeam ac ISO 27dBi 500mm in Nairobi, Kenya from Starmount ubiquiti dealers
Model: PBE-5AC-400-ISO-US PowerBeam AC ISO 5 GHz airMAX ac Bridge with RF Isolated Reflector The Ubiquiti Networks PowerBeam ac ISO is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PBE-5AC-500-ISO 5GHz PowerBeam ac ISO 27dBi 500mm directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. Innovative Mechanical Design The integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.
Innovative Mechanical Design
- Metal-plated interior of rear housing Enhances RF shielding.
- Built-in mechanical tilt The mounting bracket offers ± 20° of tilt.
- Convenient pole-mounting Only a single wrench is needed to mount the PowerBeam ac ISO on a pole.
- Fasteners GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
- Dish and brackets Made of galvanized steel that is powder-coated for superior corrosion resistance.
- Protective radome Shields the radio from nature’s harshest elements.
Integrated Radio Design
Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.
airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.
|Processor Specs||Atheros MIPS 74Kc, 560 MHz|
|Memory||128 MB DDR2, 16 MB Flash|
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|Physical / Electrical / Environmental|
|Dimensions||564 x 564 x 308 mm (22.20 x 22.20 x 12.13″)|
|Weight||5.2 kg (11.5 lb)|
|Power Supply||24V, 0.5A Gigabit PoE|
|Power Method||Passive PoE (Pairs 4, 5+; 7, 8 Return)|
|Supported Voltage Range||20-26VDC|
|Max Power Consumption||8 W|
|LEDs||(1) Power, (1) LAN, (4) WLAN|
|Signal Strength LEDs||Software-Adjustable to Correspond to Custom RSSI Levels|
|Channel Sizes||PtP Mode: 10/20/30/40/50/60/80 MHz
PtMP Mode: 10/20/30/40 MHz
|Built-In Mechanical Downtilt||± 20°|
|Enclosure||Outdoor UV Stabilized Plastic|
|Mounting||Pole-Mount Kit Included|
|Wind Loading||984 N @ 200 km/h (221.2 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|ESD/EMP Protection||Air: ± 24 kV, Contact: ± 24 kV|
|Operating Temperature||-40 to 70° C (-40 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Salt Fog Test||IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5|
|Vibration Test||IEC 68-2-6|
|Temperature Shock Test||IEC 68-2-14|
|UV Test||IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4|
|Wind-Driven Rain Test||ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5|
|Regulatory / Compliance Information|
|Wireless Approvals||FCC, IC, CE|
|Operating Frequency Summary (MHz)|
|Worldwide||5150 – 5875 MHz|
|USA||U-NII-1: 5150 – 5250 MHz
U-NII-2A: 5250 – 5350 MHz
U-NII-2C: 5470 – 5725 MHz
U-NII-3: 5725 – 5850 MHz