UniFi AC In‑Wall Pro Wi-Fi Access Point

UniFi AC In‑Wall Pro;

Shop for UniFi AC In‑Wall Pro Wi-Fi Access Point in Nairobi, Kenya from Starmount ubiquiti dealers

UniFi AC series In-Wall 802.11ac Pro Wi-Fi Access Point featuring 3 10/100/1000 Ethernet ports (1) PoE In + Data, (1) PoE Out + Data, and (1) Data only. Note: 802.3 at PoE+ input is required to use PoE pass through.

The Ubiquiti UniFi UAP-AC-IW-PRO is a compact and discrete 802.11ac indoor access point. It features 3x3 MIMO 2.4GHz and 3x3 MIMO 5GHz, with a transmission speed of up to 450 + 1300 Mbps. The UAP-AC-IW-PRO is designed with offices, hotels, and hospitals in mind, allowing scalable and dedicated WiFi per room.

UniFi AC In‑Wall Pro Key Features

• Scalable. Dedicated WiFi per room
• Easy Setup, Monitoring, and Control
• Fast Radios: 802.11ac
• 3x3 MIMO
• 1300Mbps Data Rate
• 48V PoE Passthrough

The antenna system includes 1 built-in antenna with a gain of 5dBi for the 2.4GHz band and 6.5dBi for the 5GHz band. It also fully supports roaming when transferring associated clients between APs. This device is also available as a 5 pack.

Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source. Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

Deployment Example with the power of PoE
Turn existing wiring into per-room WiFi with the UniFi PoE Switch series (requires Cat5e or higher)

Product Specifications:

• Buttons: Reset
• Networking Interface: (3) 10/100 Ethernet Ports
• Concurrent Clients: 100+
• BSSID: Up to Four per Radio
• Maximum Power Consumption: 6W
• VLAN: 802.1Q
• Max Data Speed: 150Mbps
• Max Range: 82′ (25m)
• Wi-Fi Standards: 802.1 1 b/g/n
• Antenna Gain: 1dBi
• Max TX Power: 17dBm
• Power Method: PoE 802.3af